Climate Wizard is easy to fit to existing buildings with refrigerated air conditioning plants, as well as brand new projects. In most cases, some design expertise will be required to correctly apply the Climate Wizard system. This can be provided by Seeley International, an HVAC advisor or by your consulting engineer, depending on the complexity of the project.
If you want more cooling than you currently have, with minimum disruption to your operations, install Climate Wizard as a Stand Alone or Supplementary system into your building:
- Regular air conditioning practices apply to the system design regarding duct sizes, outlet registers/diffusers, etc
- It will not interfere with your existing air conditioning system because it adds no moisture – in fact, it will enhance its performance
- The additional airflow into the building must be accounted for either by adding natural exhausting, or by adding mechanical extraction
Climate Wizard produces large amounts of cool air at very low cost, so use it as a Stand Alone system, or in conjunction with refrigerated systems – either way, it will save you lots of money. Climate Wizard takes load off your existing air conditioning plant when you employ it for fresh air pre-cooling, thereby removing load from your existing air conditioning compressors as well.
If you want to simply reduce the cost of running your existing air conditioning plant, install Climate Wizard as a Cold Front Cooling system. Climate Wizard can be ducted directly into the fresh air intake of your plant, or it can be delivered into the plant room, as shown in the diagrams below. Alternatively, it can be a Supplementary installation, remote from the plant, and discharging all of the required fresh air into the conditioned space.