Climate Wizard

Climate Wizard is a cutting-edge cooling system from Seeley International, in Australia. Seeley International is a world leader in Evaporative cooling systems with factories in Australia and USA.

Climate Wizard is a hyper efficient indirect cooling system, that is designed in Australia and engineered to cool in the hottest climates on earth. Climate Wizard generates 100% fresh cool outside air at temperatures that rival the cooling performance of refrigerated systems, coupled with up to 80% lower energy consumption compared with a similar refrigerated system .In a time when the world is working on the ozone friendly refrigerants and their low cooling efficiencies at high temperatures, the climate wizard uses only water and provides exceptional cooling even at very high temperatures.

Kuwait has a very hot and dry climate with the humid period only lasting for not more than 10 days a year. The performance of Climate wizard increases as the temperature and dryness increase, making it ideal for Kuwait.

During the peak summer season from May to October, the temperatures always hover at the 47-52 Celcius, during  the day time, at these temperatures the refrigerated air conditions lose their efficiency, and also causes huge stress on the compressor.The electricity consumption during this period is at it peak, due to the very high Heat load

Climate Wizard performs with great efficiency in Kuwait’s hot climate and when used along with HVAC units, it can greatly reduce the cooling load on the HVAC units.Climate Wizard is able to reduce the temperature from 50 Celcius to 18 Celcius with less electricity consumption than a Water Kettle. Climate Wizard has the potential to greatly reduce the energy consumption of buildings, by deploying the PPCVS ( Positive Pressure Cooling and Ventilation Solution) in buildings.

Climate Wizard vs refrigerated cooling as temperature rises

Climate Wizard’s cooling performance can rival that of refrigerated systems,using up to 80% less energy.

That’s not only great for reducing power bills; it’s also great for the environment. And, no matter how hot it gets outside, Climate Wizard uses the same amount of power and still delivers 100% fresh, cool air inside.

This is in direct contrast to refrigerated systems, which require increasing amounts of power as outside temperatures rise. Climate Wizard’s cost-saving capabilities actually increase, when the heat is at its highest.

At the same time, Climate Wizard’s performance also increases as temperatures rise – again, in complete contrast to refrigerated systems.

Climate Wizard indirect evaporative air conditioners use a hyper-efficient counter-flow heat exchanger to produce 100% fresh, cool, outside air, with no added moisture.

The fresh cold air produced by Climate Wizard can be similar to that produced by refrigerated systems, with temperatures that approach the ambient dew-point temperature.

1. Hot air enters the cooler
   • Hot outside air enters the cooler via the inlet.
   • A powerful, energy-efficient, electric fan moves the air towards the core.
2. Hot air passes through the core
   • The core is an air-to-air heat exchanger consistingof alternating dry and wet channels.
   • All of the air passes along the dry channels and gains no additional moisture.
3. Warm, moist air exhausted outside
   • As the air exits the dry channels, a portion of the conditioned air is returned through the wet channels.
   • Through evaporation and conduction, it gains both moisture and heat. The channels are continuously soaked with water. This moist, warm air is then
     exhausted outside of the building.
   • No moisture is transferred across the membranes between the dry and wet channels; only temperature (heat) is transferred.
   • The heat passes out of the air in the dry channels through the membrane and into the air passing through the wet channels.
   • In this way, the air in the dry channels becomes progressively colder but gains no moisture.
4. Fresh, cool outside air passes into the building
   • The air passing along the dry channels in the core is cooled, with no moisture added.
   • This fresh, cool air passes into the building.

Climate Wizard can be deployed in a building using different installation methods , based on our Application.

• Delivers all the cooling required for the building
• No other equipment required
• No moisture is added into the building
• Ideally suited to the addition of in-line heating equipment
• Product of choice where indoor moisture must not be increased and low cost air-cooling is required
• Depending on latent load, up to 50% of return air can be re-circulated through the Climate Wizard for added savings.
• Also used to provide fresh cool air, where split air conditioning is installed
• Designed to provide all the fresh air that any system requires, removing that load from the main plant

• Delivers all the cooling required for the building– no other equipment required
• No moisture is addedinto the building
• Ideally suited to the addition of in-line heating equipment
• Product of choice where indoor moisture must not be increased and low cost air-cooling is required
• Depending on latent load,up to 50% of return air can be re-circulated through the Climate Wizard for added savings.

Your air conditioning plant is designed to constantly introduce a percentage of fresh air – usually 10% to 25% of the total air quantity being delivered into the building. In summer, this fresh air can be very hot and must be cooled, which requires large amounts of energy and that means running costs increase.

Climate Wizard can pre-cool fresh air for a much lower cost, removing this cooling load from your existing plant. Not only do you save money on your power bill, but you also save expensive wear and tear on your air conditioning plant, extending its useful life.

• Climate Wizard pre-cools all the required fresh air before it enters the refrigeration plant
• Depending on latent load,upto 50% of return air can be re-circulated through the Climate Wizard for added savings
• Easily retrofitted to existing air conditioning plant for immediate cost and energy savings,and load relief for both the plant and the electricity supply infrastructure
• For new air conditioning system design, Climate Wizard offers the option of down sizing the refrigeration equipment, where Climate Wizard provides all the fresh air.
  This is achieved with much lower energy use than the refrigeration plant consumes to deliver the same temperature, thereby taking significant load off the plant and cost off the cooling bill.
• The total cooling capacity of Climate Wizard actually rises with increasing temperature, in contrast to the refrigerated air conditioning, where the capacity decreases with increasing temperature

Applications of CW